Hi Cleve,
I did not read the earlier mails.
What should be taped on both sides
(because it is structural)???
I have istalled my cockpit module
and taped it from everywhere to the
lower canoe, also baggage bay bulkhead,
just like they call in manual.
The upper fuselage side is not installed yet.
Cheers, Raimo
Raimo M W Toivio
OH-XRT #417 Mono
OH-CVK
OH-BLL
37500 Lempaala
Finland
tel + 358 3 3753 777
fax + 358 3 3753 100
gsm + 358 40 590 1450
raimo.toivio@rwm-systems.fi
www.rwm-systems.fi
----- Original Message -----
From: <clevelee@cswebmail.com>
Subject: Baggage bay bulkhead to fuselage
> Thanks all for the help with this. It makes sense that it's structural and
> should be taped on both sides. Andy, if you're reading this, you may want to
> include taping the backside in the assembly instructions. Also, bondoing in
> some small blocks on the back side before starting the lay-up will help to
> keep
> it from moving during the front side layup.
>
> I remain fascinated that from around the world, we can all have the same
> experience and creative ways to resolve common issues. Obviously that's what
> this forum is about, but it still is worth pausing to appreciate.
>
> ...pause . .
>
> Thanks,
> Cleve
> A198 MonoXS Jabiru 3300
>
> ___________________________________________________
> The ALL NEW CS2000 from CompuServe
> Better! Faster! More Powerful!
> 250 FREE hours! Sign-on Now!
> http://www.compuserve.com/trycsrv/cs2000/webmail/
>
>
>
>
|