Hi! John,
There wasn't a recognized way to fix the panel, You will probably have to
locate all the connection plugs as you pull the panel forward. Disconnect
the battery though ...first operation.
I built mine as fixed and put two access panels from the engine side of the
firewall, but it's still a pig of a job.
I would think it will be located some where close by the Flap relay as a
pair.(Be sure to get the right one !
Regards
Bob Harrison G-PTAG
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of John Price
Sent: 02 March 2010 19:08
Subject: Europa-List: Re: Electric Trim Problems
Thanks Chaps,
Having given this some thought I think that we will replace the relay for a
new Mk 2 Ray Allen unit. This Saturdays job!
We don't think that the wiring is the fault because the DC motor would
exhibit the problem when driving in either direction.
As we didn't build the aeroplane any suggestions where we might find the
thing? I suspect behind the panel close to the isolator switch might be a
good starting point. Last help, Is taking the panel off easy, or a sod of a
job ?
John.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=288954#288954
|