"Justin Kennedy" <Justin@systemwise.co.uk> wrote:
<<<Our Rotax 912S also has a Skydrive carb heater so I was interested to
hear his take on the
subject. His rule of thumb was to cruise at 90-100 degrees CHT and
100-110 degrees Oil Temp.>>>>
Hi Justin,
As a side issue, did you have any problem with the Skydrive heater causing
the carbs to sit too far aft. I have a Classic cowl and engine mount and
wish to install the Skydrive heaters as well. I have the cold air induction
mod with the rectangular filter box. The filter box is not very far from the
firewall now. If I add the skydrive carb heat mod will I have enough room? I
don't want the air filter box to be hitting the firewall when the engine
shakes during start and shut down. Do you or anyone else see a problem here?
Thanks to all.
Troy Maynor
N120EU Europa Monowheel Classic
Left to finish:
Paint,interior,engine install, wiring.
Weaverville, NC USA
|