Check out pages 17-1 and 17-2 of the Rotax 912S Installation Manual (Mine is
the 9/1/1998 version). It shows the wiring of the Rotax electrical system.
The lamp is a charge indicator lamp. It's notated as item #11.
Bill
A010 Monowheel Classic
----- Original Message -----
From: "D Wysong" <hdwysong@gmail.com>
Sent: Tuesday, January 24, 2006 5:56 PM
Subject: Europa-List: Question for Rotax Drivers...
>
> Hi all,
>
> The Rotax wiring diagram shows the Ducati regulator/rectifier with the
> "L" lead across a lamp. The connector says "LAMP"... but when exactly
> will this lamp illuminate?
>
> Can someone tell me or point out the section(s) in any of the Rotax
> manual(s) that describes the function(s) this lamp serves?
>
> Undervoltage? Fault? Overvoltage? ???
>
> Specifically, I'm looking for the "nominal" electrical state of the "L"
> lead (e.g. - pulled high, pulled low, open) when:
> -- the 12V bus hot and the engine is not running
> -- the 12V bus hot and the engine is running
>
> Thanks for your help,
>
> D
>
>
>
|