Dear Jerry,
We have recently introduced lazer cut light-alloy panels for both mono and
tri-gear
Europas and these are provided with all the necessary fasteners too. For
the engine panel there's the option of the standard round VDO instruments or
the Rotax Flydat. We also do blanks for the avionics and flight instrument
panels
for those who may wish to set their panel out differently to our designs.
I doubt that you'd receive the Europa newsletter, but details were shown in
the last issue, No. 35.
As an aside, we have just started to produce the tooling for a long over-due
dedicated
instrument module for the Tri-gear Europa. So those who are building the
tri-gear will soon have to option to have a module without the recess for the
mono-wheel's gear retraction lever.
Regards
Andy
>>> "LTS" <lts@avnet.co.uk> 11/14/02 08:44am >>>
Some time ago there was some chat on the group about sub panels and laser
cutting. I subsequently spent some time on my PC and have my A/C panel on
AutoCAD and now laser cut. As a result I have several standard cut outs that
I could easily develop into a Europa sub panel if people were interested. To
make them cheap they need to be the same. Could easily be standard six
instruments + engine instruments + fuel gauge for example. Any body
interested?
Jerry
Jerry@ban-bi.com or LTS@avnet.co.uk
www.Ban-bi.com or www.avnet.co.uk/touchdown
|