The mods keep materialising... Sunday afternoon was spent designing a new
firewall
solution for 181.
After the crap ordeal changing out fuel hoses recently and the lack of easy
access
a better option was created today.
Each piece is held in place by just two fixings each and tongue and groove
interlocking.
The lower section is removable by undoing two setscrews mounted on the
inside upright face of the footwell and then sliding it downward. The upper
section is fixed by two set screws on the same inside footwell wall and remains
in situ and does not require removal until the frame is removed. There is
provided
a large inspection hatch that is fixed by tongue and groove and two set
screws on the top lip of the upper section; removal is from the top once the
airbox is out of the way.
Looking forward to fitting this mod when ever the engine is next being removed
for any reason.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=508952#508952
Attachments:
http://forums.matronics.com//files/ef2efd72_d734_4307_8a71_dc200ab8cd65_133.jpeg
http://forums.matronics.com//files/08cbd6c6_4f8a_4aef_b7c1_3ff73a448b1b_849.jpeg
http://forums.matronics.com//files/0349a675_daa7_4adb_ab1b_6134e309872f_162.jpeg
| 
