=EF=BBHi Will,
I came to the same conclusion. I replaced the factory door seals and rolled m
y own. I used a silicone bulb type seal made for residential use manufactur
ed by Frost King.
Unfortunately, it doesn=99t look like it is produced any longer. I bo
nded the seal to to an edge protector (similar to the stock door seal) using
3m type double sided adhesive tape. The self adhesive that came on the Fros
t King didn=99t adhere well and I had to remove it. The 3m tape works
very well.
No bowing of the doors. I also, included a picture of the edge protector pr
ior to bonding the seal in place.
Erich Trombley
N28ET
Classic Mono 914
|