> I feel a need for a small, light, jacking block to use with most any jack
> that
> would be part of my tool kit in the aircraft.
>
> Kevin
Kevin,
I made one out of Aluminium flat plate and angle welded together, the flat
plate has 4 holes that fit tight over the heads of the 4 bolts on the front
face of the swing arm, the angle is welded to the flat plate so one face is
parallel to the ground to which is welded a small stud to centre and stop
the jack from slipping off. This arrangement will accommodate any scissor
jack that all cars now carry. The only thing you need to source locally if
away from your home field is the jack and blocks of wood to sit the jack on
and the outriggers.
Peter
ZK-ZEB
|