Hey Mike!
I also have a stick mounted brake lever with a cable going to the master
cyl on the
firewall. Maybe I would change over to the way you are doing it. Which
master cyl
and brake handle setup are you using? Thanks!
Glenn
>From: "Mike Parkin" <mikenjulie.parkin@btopenworld.com>
>Reply-To: europa-list@matronics.com
>To: <europa-list@matronics.com>
>Subject: Re: Europa-List: Nylaflow OK for Monowheel?
>Date: Fri, 13 Jan 2006 23:44:55 -0000
>
><mikenjulie.parkin@btopenworld.com>
>
>Glen,
>
>I fitted a stick mounted master cylinder to my mono. It is really good and
>has all the braking power necessary. One finger is all that is necessary.
>I can recommend the stick mounted brake - the only drawback is - no brake
>available to the right seat. Not a problem for me really, I don't trust
>many people with my aircraft anyway.
>
>regards,
>
>Mike.
>
>
>----- Original Message -----
>From: "GLENN CROWDER" <gcrowder2@hotmail.com>
>To: <europa-list@matronics.com>
>Cc: <gcrowder2@hotmail.com>
>Sent: Friday, January 13, 2006 8:29 PM
>Subject: RE: Europa-List: Nylaflow OK for Monowheel?
>
>
><gcrowder2@hotmail.com>
> >
> > I didn't like the brake feel with the Nylaflow tubing on my monowheel.
> > I switched to the steel braided hose and improved the brake force
> > to the brake noticeably. With the Mono, you need all the brake force
> > you can muster!
> >
> > Glenn
>
>
|