Ron
Just got round to reading your e-mail and it night help for you to know the
following.
The black tube supplied by Europa is 6mm, not 1/4 inch. It is this size
because that is the correct size for the master cylinder fitting. The
fittings used at the wheel cylinders are the 1/4 inch (you can get them from
A/C Spruce) and they do seal with the 6mm pipe (but it is easy to pull the
tube out of the fitting).
The 1/4 Nylaflow is very good and is now standard on the finger brake
trigear which uses a different master cylinder with 1/4 connections.
I understand that it is difficult/impossible to get a good seal to the mono
and foot brake trigear master cylinder/s with the 1/4 inch tube.
Ian Rickard #505 G-IANI XS Trigear
Europa Club Mods Rep (Trigear)
e-mail mods@europaclub.org.uk
or direct g-iani@ntlworld.com
|