0.64 REPLY_TO_EMPTY Reply-To: is empty
Hi All,
Im looking for some advice on the state of my Ampreg 20 hardener, been a new
builder
and getting ready for my very first lay-up of the rudder. The hardener seems
to have become contaminated in my resin pump. It has turned brown in colour
and I fear it is no good for use. The expiry date is 2007. It turned in colour
in the second hand resin pump, I did clean it out the best I could but fear
the contamination has come from within the pump. I did make my Europa chock
with this resin and seems OK ( PFA Inspector still to see it)
Has anyone ells had the same problem and what do you advise?
Thank you in advance
----------------
Visit EuropaOwnersForum http://www.europaowners.org/
|