Mike
The louvers are design to be exits. Hot air is to exit the engine
compartment through them. So, cut out the aft facing surface.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
http://www.europaowners.org/WileE
----- Original Message -----
From: "Mike Gamble" <mp.gamble@virgin.net>
Subject: Europa-List: xs cooling gills
>
> Do I open up the rearward or front facing sections of the cooling gills on
> the top cowling?
> Manual says open up the 'flat' surface.
> It does not take much to confuse me and both surfaces are curved!
> Thanks
> Mike Gamble
> XS 440
> Just received the FWF kit.
>
>
>
|