Yeah, it is in the section on plastics in the front of the catalog...
Tom
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Kevin
Klinefelter
Subject: RE: Europa-List: Spraylat
I cant seem to find spraylat in my Spruce catalog. You guys know where
to
find it?
Installing the windshield today.
Kevin
Airframe complete, lots of finishing to do. No panel or wiring yet
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Troy Maynor
Subject: RE: Europa-List: Spraylat
Hi Paul,
Was the second coat applied at the same time as the first or or as
Graham
described; a fresh coat over an old coat? Also, did you apply yours with
a
brush or paint sprayer?
Troy Maynor
N120EU Monowheel Classic
Left to finish:
Paint,interior,engine install, wiring.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Paul
McAllister
Subject: Re: Europa-List: Spraylat
<paul.mcallister@qia.net>
Hi All,
I have just removed the Spraylat from my windows and interestingly
enough
the most difficult stuff to get off was where I had applied a second
coat
I used duct tape to pull of the hard bits and the stubborn bits I
removed
with alcohol, although if I had thought of it I probably would have
tried
water, it may have worked.
>From my experiences I would completely remove it each year and re
apply. I
found the stuff 12 months old came off easily. The mistake I made was
to
put a second coat over the existing stuff.
Cheers, Paul
Off to the paint shop next week.
> One or two things to watch with Spraylat. If it is left on for a long
time,
> (couple of years) and particularly if it's exposed to sunlight or UV,
it
> goes brittle and is a real pain to get off. I am told the best way to
> remove it if that happens is to add a couple more coats.
=
==
==
==
==
|