Hi Gram,
Whatfinish do you like for alloy prop hub & blade bases?
Still rubbing down,
Chaz.
Gillian and Charlie
Baliscate Guest House
Tobermory
Isle of Mull PA75 6QA
Tel 44( 0)1688 302048
Fax 44())1688 302666
www.baliscate.com
----- Original Message -----
From: "Graham Singleton" <grasingleton@avnet.co.uk>
Subject: Re: Elevator travel
> Any ideas? am I missing something simple and silly?
>
>
> >Just being silly Kevin!!! Thats how it is. If I remember it's something
> >like12 degrees up and 4.* Down. It's in the manual at back where it gives
> >all measurements as final checkout.
> >
> >A large Whisky, a bad Woman and off to bed! It will all be OK in the
morning!
> >Regards
> >
> >Gerry
>
> If its a monowheel you need 13deg up and 4 or 5 down. When the tail is on
> the ground the elevator is only deflected a little from level so it helps
> to have all the downforce you can get when speed is dropping through
> 20 knots and the rudder stops being effective. So that the tailwheel can
> prevent a ground loop.
> Graham
> just another thought
>
>
|