Hi William,
I think that we in Germany can give you some assistance as we all have
to go through the noise test procedure. Perhaps the Austrian and Swiss
could also give some input. You will probably need data for Europas with
all engine / prop configurations.
Let us know what the CAA or PFA need. If it is just a copy of the noise
certs that will be easy but I suspect that they will need the noise
measurement data and procedures. We have it all filed away somewhere!!
Barry Tennant
William Mills schrieb:
>
> Sorry, Roger and all.
> I am afraid I was inadvertently misled by someone at the CAA. Apparently
> their service to Certified A/C owners does not extend to Permit A/C owners,
> so they will not be sending me a Noise Certificate! That's the bad news,
> but the good news is that Francis Donaldson will pursue Noise Certs for
> Permit owners on behalf of the PFA and David Bosomworth will pursue the
> matter on behalf of the Club. Apparently there was a flood of applications
> from other Europa owners to the CAA following my message, so the CAA is now
> aware that there is a strong demand. Let's hope something will be in place
> by next year. If any German, or other Continental Country Europa owner, who
> might be able to assist with noise level test data etc I am sure David would
> be most grateful to receive the information.
> Best wishes to all,
> William
>
> ----- Original Message -----
> From: "Roger Anderson" <Randerson@skewstacks.freeserve.co.uk>
> Subject: Re: Noise Certificates
>
> > Classic Europa with a 912UL and an Arplast PV50.
> >
> > "Ditto."
> >
> > I will let you know when I receive the certificate, or if I do not get
> one!
> >
> > "Yes please!"
> >
> > Many thanks,
> > Roger.
> >
> >
> >
> >
>
|