Re: getting wings on

[Graham Singleton <grasingleton@avnet.co.uk>]

>Dear Ted
>If the bearing is able to rotate more than 5 degrees in any direction then 
>it must not be pushed fully in to the housing.  The design of the housing 
>should limit rotation to allow enough movement due to dihedral plus a 
>small clearance only.
>
>regards
>
>Andy Draper
>Europa Aircraft

Andy,
Digging around in a foggy corner of my mind, I seem to remember that the 
bearing is not symmetrical
  in the back to front sense so it's possible to install the bearing wrong 
way round?
Graham