Re: Position lights - wires after the fact

Subject:	Re: Position lights - wires after the fact
From:	Nigel Charles <72016.3721@compuserve.com>
Date:	Mon, 11 Feb 2002 09:48:41

Message text written by INTERNET:forum@europaclub.org.uk
>I have fitted a 6mm radius copper disc
at the base of the aerial to act as a ground plane, but if this is not
satisfactory I intend attaching two or three strands of co-ax sheath about
22" long to the inside of the fuselage<

6mm will definitely be insufficient. Ground planes should be 1/4 wavelength
radius (ie 22" in our case). Sheet tin foil is a satisfactory lightweight
solution to this problem.

Nigel Charles

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Position lights - wires after the fact, (continued) Re: Position lights - wires after the fact, clevelee Re: Position lights - wires after the fact, Bob Harrison Re: Position lights - wires after the fact, Nigel Charles Re: Position lights - wires after the fact, Nigel Charles Re: Position lights - wires after the fact, Bob Harrison Re: Position lights - wires after the fact, Bob Harrison Re: Position lights - wires after the fact, Klaus Dietrich Re: Position lights - wires after the fact, Nigel Charles Re: Position lights - wires after the fact, Barahona Alonso Francisco Javier Re: Position lights - wires after the fact, Nigel Charles Re: Position lights - wires after the fact, Nigel Charles <= Re: Position lights - wires after the fact, Roger Anderson Re: Position lights - wires after the fact, david joyce Re: Position lights - wires after the fact, Tony S . Krzyzewski Re: Position lights - wires after the fact, Roger Anderson Re: Position lights - wires after the fact, Dale Hetrick Re: Position lights - wires after the fact, Dave Simpson Re: Position lights - wires after the fact, Fred Fillinger Re: Position lights - wires after the fact, Fred Fillinger Re: Position lights - wires after the fact, Richard Iddon Re: Position lights - wires after the fact, Jeremy Davey

Previous by Date:	Re: Position lights - wires after the fact, Nigel Charles
Next by Date:	Re: :-), Roger Anderson
Previous by Thread:	Re: Position lights - wires after the fact, Nigel Charles
Next by Thread:	Re: Position lights - wires after the fact, Roger Anderson
Indexes:	[Date] [Thread] [Top] [All Lists]