Hi! Paul
I don't remember the manual but I've got a number of layers of ply wood
in mine to make up the gap! ?
Bob H G-PTAG Europa /Jabiru 3300
> -----Original Message-----
> From: owner-europa@aztec.houxou.com
> Subject: tail spring
>
>
> Started setting up the tail wheel spring this afternoon. Have drilled the
> stern post and set up the spring 235 mm below fuselage lower moulding as
> described. When I measured the distance from the under side of the flat on
> the tail spring to fuselage moulding I get about 40 mm. This
> seems rather a
> large gap to be filled by 5 or even 6 layers of 3mm ply and bid as the
> manual suggests. I think I can probably reduce the gap a bit by
> fiddling but
> can anyone out there remember what sort of a gap they had beneath the tail
> spring?
>
> regards
>
> Paul Stewart #432
>
>
|