Re: Stiff Roll Controls

Subject:	Re: Stiff Roll Controls
From:	Duncan McFadyean <HalcrowMRO@compuserve.com>
Date:	Mon, 12 Jan 1998 09:04:20

Possible solution:
When I originally fixed my control torque tube and bearing together I put
in a polythene bag as a spacer. After cure the polethene was ripped out
leaving the merest hint of end-float in the bearing which dissppeared upon
lubrication.  So far, there is no binding with changes in temperature.

<Prev in Thread]	Current Thread	[Next in Thread>
Stiff roll controls, BRYNALL Re: Stiff roll controls, Erich D Trombley stiff roll controls, BRYNALL Stiff Roll Controls, Edward Gladstone Stiff Roll Controls, Graham Singleton Re: Stiff roll controls, Kenneth S . Whiteley Re: Stiff Roll Controls, Rowland and Wilma Carson Re: Stiff Roll Controls, Miles McCallum Re: Stiff Roll Controls, Kenneth S . Whiteley Re: Stiff Roll Controls, John Bean Re: Stiff Roll Controls, Duncan McFadyean <= Re: Stiff roll controls, Tony Krzyzewski Re: Stiff Roll Controls, Klaus Dietrich Re: Stiff Roll Controls, Graham Singleton Re: Stiff Roll Controls, Gramin Re: Stiff Roll Controls, Klaus Dietrich

Previous by Date:	Re: Compass, Alan Stewart
Next by Date:	No Subject, David . Ward
Previous by Thread:	Re: Stiff Roll Controls, John Bean
Next by Thread:	Re: Stiff roll controls, Tony Krzyzewski
Indexes:	[Date] [Thread] [Top] [All Lists]