Anthony, It would be interested to know whether you usually fill the
fuel system (and if so ? up to the top) before you put the plane away or
whether you fill up just before you go flying. That is will that pipe
have spent most of its life in contact with fuel or with fumes? Regards,
David Joyce, GXSDJ
On 2017-12-15 20:47, anthony van eldik wrote:
> Dear David,
>
> For your information my fuel filler hose dated 2001 was inspected
> independently
by two engineers including my inspector and found to be in very good condition
inside/out.Fuel used over the years was BP premium unleaded .Pending a suitable
replacement the hose will be refitted. It should be possible to find a
replacement
silicone fuel approved hose. I have the Xs extended baggage bay short
hose version.
> Regards
> Anthony van Eldik
>
> Sent from my iPad
>
> On 15 Dec 2017, at 20:17, davidjoyce@doctors.org.uk wrote:
>
> Yes 51 mm it is, but if there is no rush, there is a good possibility of the
LAA coming up with an approved solution fairly soon
>
> Regards, David Joyce,GXSDJ
>
> On 2017-12-15 19:54, Roland wrote:
>
>
> Is 51 mm inner diameter the correct size?
> I'm about to replace the fuel hoses next month and I'm afraid that the fuel
> filler
hose has deteriorated on the inside as well and I'd like to choose the best
available.
> Regards
> Roland
> PH-ZTI
> XS TG 914
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476416#476416 [1]
>
> ttp://www.matronics.com/Navigator?Europa-List
> ics.com [2]
> .com
> .matronics.com/contribution [3]
Links:
------
[1] http://forums.matronics.com/viewtopic.php?p=476416#476416
[2] http://ics.com
[3] http://matronics.com/contribution
|