Rowland, you are welcome to pop over to Bicester, my undercarriage works well
and
the aircraft is up on a trestle.
Alan Twigg
Sent from my iPhone
> On 6 Jun 2015, at 13:38, Rowland Carson <rowlandcarson@gmail.com> wrote:
>
>
>> On 6 Jun 2015, at 13:29, jonathanmilbank <jdmilbank@yahoo.co.uk> wrote:
>>
>> Your suspension block is probably different from mine, which was one of the
earliest and came needing work done by the builder. It was red in colour, solid
and thus needed holes bored through with a hole saw in a drill press. A band
saw was needed to cut out 'V' wedges top and bottom and finally the factory
decided
that the block wasn't thick enough, so we had to add in a shim made from
a piece of 1/4" ply board.
>> Therefore I guess that it's unsurprising that your problems are different.
>> Still,
you might have been in possession of one of the early blocks if you had
bought an old kit from someone.
>
> Jonathan - no, my block is of the newer sort, black with the hole and the
> notches
already cut out. Anyway, I suspect that the solution to my problem may lie
elsewhere so I dont want to focus on one thing to the detriment of the big
picture!
>
> in friendship
>
> Rowland
>
> | Rowland Carson ... that's Rowland with a 'w' ...
> | <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk
> | Skype, Twitter: rowland_carson Facebook: Rowland Carson
> | pictures: http://picasaweb.google.com/rowlandcarson
>
>
>
>
>
>
|