All,
Just want to thank all who expressed interest in the models. Eleven people
contacted
me for the 3 Europa models I had remaining. These were offered on a simple
first come, first serve approach.
Unfortunatly the 3 models stacked in the same 12"x39" area, so still working on
cleaning up my shop!
Thanks again,
Cleve Lee
A198 Mono XS to be converted to conventional and dumbed down to Light Sport.
Models remaining: (2) RV-6, (2) Velocity, (4) Zenith Zodiac XS
-----Original Message-----
>From: Europa-List Digest Server <europa-list@matronics.com>
>Sent: Dec 1, 2012 3:01 AM
>To: Europa-List Digest List <europa-list-digest@matronics.com>
>Subject: Europa-List Digest: 6 Msgs - 11/30/12
>
>*
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
>Today's complete Europa-List Digest can also be found in either of the
>two Web Links listed below. The .html file includes the Digest formatted
>in HTML for viewing with a web browser and features Hyperlinked Indexes
>and Message Navigation. The .txt file includes the plain ASCII version
>of the Europa-List Digest and can be viewed with a generic text editor
>such as Notepad or with a web browser.
>
>HTML Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter
> 12-11-30&Archive=Europa
>
>Text Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter
> 12-11-30&Archive=Europa
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Europa-List Digest Archive
> ---
> Total Messages Posted Fri 11/30/12: 6
> ----------------------------------------------------------
>
>
>Today's Message Index:
>----------------------
>
> 0. 09:05 AM - [Please Read] - Last Official Day of List Fund Raiser!
> (Matt
Dralle)
> 1. 12:35 AM - Re: Always a slight coolant leak after flight (stephan
> cassel)
> 2. 04:02 AM - Silicone Hoses for Rotax 912 (UVTREITH)
> 3. 08:01 AM - Re: Always a slight coolant leak after flight (PHILLIPS I)
> 4. 12:56 PM - Re: Silicone Hoses for Rotax 912 (Roland)
> 5. 01:48 PM - Re: Silicone Hoses for Rotax 912 (Robert Borger)
>
>
>
>________________________________ Message 0
>_____________________________________
>
>
>From: Matt Dralle <dralle@matronics.com>
>Subject: Europa-List: [Please Read] - Last Official Day of List Fund Raiser!
>
>
>Dear Listers,
>
>Its November 30th and that always means a couple of things. Its my birthday
>again;
>number 49 actually! But it also means that its that last official day of
>the Matronics Email List Fund Raiser! If you been thinking about picking up
>one of those really nice incentive gifts now is the time to jump on it!!
>
>If you've been meaning to make a Contribution this month but have been putting
>it off for some reason, NOW is the time!
>
>I will be posting the List of Contributors in a few days, so you'll probably
>want
>to be known as a person that supported the Lists!
>
>I want to thank everyone that has so generously made a Contribution this year
in
>support of our Lists. It is your generosity that keeps this operation running
>and I don't ever forget it.
>
>The List Contribution Web Site is fast and easy. Please support our habit by
making
>your Contribution right now:
>
> http://www.matronics.com/contribution
>
>Or, by dropping a personal check in the mail to:
>
> Matt Dralle / Matronics
> 581 Jeannie Way
> Livermore CA 94550
>
>Thank you to all in advance!
>
>Matt Dralle
>Matronics Email List Administrator
>
>
>________________________________ Message 1
>_____________________________________
>
>
>Subject: Re: Europa-List: Always a slight coolant leak after flight
>From: stephan cassel <stephan.cassel@gmail.com>
>
>Hi
>
>
>I am also using the silicon hoses from Stefan Ingemarsson. Very good hoses
>I may add.
>
>My start to drip at the radiator.
>
>
>It looks like the inner diameter is a bit, not much, too big. I bought
>Teflon tape and put some layers (1-1,5 mm or so) on the both inlet and
>outlet of the radiator.
>
>The inlet and outlet must be totally dry when applying the Teflon tape. At
>least for me this stopped the drip completely.
>
>
>Another thing I have observed is that this type of silicon is vulnerable to
>heat, especially close to the exhaust system and should be isolated.
>
>
>Best regards
>
>Stephan
>
>LN-STE
>
>________________________________ Message 2
>_____________________________________
>
>
>From: "UVTREITH" <uvtreith@t-online.de>
>Subject: Europa-List: Silicone Hoses for Rotax 912
>
>Hallo Europa Family, hello Stefan.
>
>
>As I do not have the contact from Stefan Ingemarsson I chose this way.
>
>There is interest in Silicone Hoses (the blue one) for one or two Europa
>Classic, both equipped with Rotax 912.
>
>Stefan, please send me a mail with price and delivery - many thanks.
>
>
>Bruno Reith
>
>uvtreith@t-online.de
>
>
>________________________________ Message 3
>_____________________________________
>
>
>Subject: Re: Europa-List: Always a slight coolant leak after flight
>From: PHILLIPS I <ivor.phillips@ntlworld.com>
>
>I agree with Yannick, I have used silicone hoses since day one with the
>spring
>clamps and never had any kind of leak in five years,
> Also all the hoses are fitted with a reflective
>thermal sleeve, exspecially the hose from the pressure cap container to the
>Radiator
>IMHO is a must!
>
>Ivor
>G-IVER 914
>
>On 30 November 2012 08:34, stephan cassel <stephan.cassel@gmail.com> wrote:
>
>> Hi
>>
>>
>> I am also using the silicon hoses from Stefan Ingemarsson. Very good hoses
>> I may add.
>>
>> My start to drip at the radiator.
>>
>>
>> It looks like the inner diameter is a bit, not much, too big. I bought
>> Teflon tape and put some layers (1-1,5 mm or so) on the both inlet and
>> outlet of the radiator.
>>
>> The inlet and outlet must be totally dry when applying the Teflon tape. At
>> least for me this stopped the drip completely.
>>
>>
>> Another thing I have observed is that this type of silicon is vulnerable
>> to heat, especially close to the exhaust system and should be isolated.
>>
>>
>> Best regards
>>
>> Stephan
>>
>> LN-STE
>>
>> *
>>
>> *
>>
>>
>
>________________________________ Message 4
>_____________________________________
>
>
>Subject: Europa-List: Re: Silicone Hoses for Rotax 912
>From: "Roland" <schmidtroland@web.de>
>
>
>stefan.ingemarsson@gmail.com
>
>Stefan's advertisement for the hoses can be found in the clubmagazine. He sent
>me the table with the prices by e-mail.
>
>Roland
>
>
>Read this topic online here:
>
>http://forums.matronics.com/viewtopic.php?p=389629#389629
>
>
>________________________________ Message 5
>_____________________________________
>
>
>Subject: Re: Europa-List: Silicone Hoses for Rotax 912
>From: Robert Borger <rlborger@mac.com>
>
>Bruno,
>
>Stefan usually advertises in the "Europa Flyer" magazine. His contact
>information is:
>
>Stefan.ingemarsson@gmail.com
>Stefan Ingemarsson,
>Skovde,
>Sweeden
>
>Blue skies & tailwinds,
>Bob Borger
>Europa XS Tri, Rotax 914, Airmaster C/S Prop.
>Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
>3705 Lynchburg Dr.
>Corinth, TX 76208-5331
>Cel: 817-992-1117
>rlborger@mac.com
>
>On Nov 30, 2012, at 6:01 AM, UVTREITH <uvtreith@t-online.de> wrote:
>
>Hallo Europa Family, hello Stefan.
>
>As I do not have the contact from Stefan Ingemarsson I chose this way.
>There is interest in Silicone Hoses (the blue one) for one or two Europa
>Classic, both equipped with Rotax 912.
>Stefan, please send me a mail with price and delivery ' many thanks.
>
>Bruno Reith
>uvtreith@t-online.de
>
>
>
>
>
>
>
>
>
|