Re: Europa-List: epoxy to firewall bond

[Fred Klein <fklein@orcasonline.com>]

On Apr 25, 2010, at 2:04 PM, William McClellan wrote:

>  I have attached a picture showing the scuff sanding preparation I  
> did to the firewall surface.

Bill,

Your scuffing looks about like mine...as a rule, in addition to  
scuffing, I fire up my compressor to blast away loose particles before  
wiping surface down w/ acetone...then brush on a tack coat of  
resin...and, only then apply BID. Near as I can tell, my BID tapes on  
the firewall are not suspect.

your mileage may vary,

Fred