Hello all,
The silencer (muffler) on my XS / 912 uls (the new oval section
silencer) sits forward of the moulded recess in the cowl. The front of
the silencer is touching the cowl on the outboard side, forward of the
recess. The straight outlet pipe from the silencer would exit several cm
above the moulded recess. The silencer could not move any further back,
as it has only a few mm clearance from the bottom attachment of the ring
mount. Photo attached.
I presume this is a result of having the oval section silencer instead
of the round section one. Have others had this problem, and if so what
have you done?
Keith Hickling,
New Zealand.
|