I have an Arplast spinner fitted on my 914 Europa with XS cowl and PV50
prop. From memory Iwas told by Jerry at Lyndhurst that the spinner was as
used on the Pulsar. It matches up with the cowl fine.Just checked my
original invoice but no part number listed.
Geoff Leedham G-EOFS
----- Original Message -----
From: "milnera" <alan_milner@totalise.co.uk>
Sent: Wednesday, January 11, 2006 1:48 PM
Subject: Europa-List: Arplast spinner - which one?
>
> Has anyone fitted an arplast supplied spinner to a PV50, 912S XS? If so,
> which type, CP or CP3?
>
> I'm told some people have used the CP3 (diameter of 273mm, rear face 58mm
> behind flange-front) but to me this doesn't seem to be as good a fit as
> the CP model (diameter of 262mm, rear face 22mm behind flange-front)
>
> Any comments welcome.
>
> Alan. XS trigear.
> ----------------
>
>
> --
> 05/01/2006
>
>
--
|