Thanks Jeremy,
I have found a caution from Neville on a previous conversation regarding
some of the properties of ampreg 22 not being as good as ampreg 20.
>Hi All,
>Before you all go off and buy Ampreg 22, please note that Ampreg 22 has not
>been
>qualified by Europa as an alternative to Ampreg 20. The physical properties
>fall short of the Ampreg 20 system. Anyone building in the UK would have to
>deal
>with the P.F.A. if they wish to substitute the 20 for ANY other resin.
> Cheers,
>Nev.
Not sure what the specific properties are, or whether this was just the
factory line.
Obviously if I was to change resin system it must clearly be for a system
with same or better properties than the original...
Cheers Paul.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Jeremy Davey
Subject: RE: Europa-List: Ampreg 20 resin,
Paul,
I'm open to correction, but I seem to remember that it's simply that
Ampreg20 is the originally approved resin system. I also vaguely remember
being told that it would be possible to get PFA Engineering approval to use
other systems like Ampreg22, but no-one has made such a submission to them.
(Please, this is not a cue for more complaints about PFA Engineering!)
Regards,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Europa Club Vice-Chairman, Webmaster, PFA NC Representative
PFA EC Member
"If you can keep your head when all about you are losing theirs, then it is
possible you haven't grasped the severity of the situation."
Tail done
Standard XS wings with mods underway
CM installed in fuse (with airbrakes fittings)
1430 build hours to date, build currently stalled due to house moves and
lack of workshop
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul Sweeting
Subject: RE: Europa-List: Ampreg 20 resin,
--> <europa@percyville.plus.com>
Yep I've got pretty much the same result, marineware have a few packs in
stock, Barry at Dauntless only has slow or fast not standard.
It seems that is only Europa that still use this "old" composite system,
(most chandlers incorrectly reckon its been discontinued!) and it's only
produced in very limited quantities as one off orders by SP systems...
Why does it need to be ampreg 20, not the more widely available ampreg 22 or
106??
Cheers
Paul.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Brian Davies
Subject: RE: Europa-List: Ampreg 20 resin,
I searched for some standard Ampreg late this year without luck, and then
tried Europa- they delivered it the next day!
Brian Davies kit 454
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
JohnDHeykoop@aol.com
Subject: Re: Europa-List: Ampreg 20 resin,
In a message dated 30/12/05 16:20:34 GMT Standard Time,
europa@percyville.plus.com writes:
> I wish to purchase some new resin as mine has all expired.
>
Paul
I bought some last year from Aquafax Ltd, tel 01270 528822, fax 01270
528833.
Regards
John Heykoop
Kit 536 G-JHKP
Installing the doors. Firewall Forward next.
--
--
This email has been verified as Virus free Virus Protection and more
available at http://www.plus.net
--
--
--
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net
--
--
|