--> Europa-List message posted by: "Ronald J. Parigoris"
<rparigor@suffolk.lib.ny.us>
At the moment without pushrods installed, if you let the door handle snap closed
from
the opened position it will bend the steel stop pin. If the pin bends once the
cover
is bonded in place, it is not very user friendly to repair.
I am thinking I could add a piece of 80 durometer polyurethane under the inner
handle
bonded to the door to act as a more robust stop that gives a little.
Any other ideas?
Thx.
Ron Parigoris
A-265
N4211W
|