I used the smoothe prime over the superfill by rolling then spraying
thinned smoothe prime over the sanded base. The resulting surface
couldn't be better.
Steve Hagar
A143
Mesa, AZ
Steve Hagar
hagargs@earthlink.net
> [Original Message]
> From: Paul Stewart <europa@pstewart.f2s.com>
> To: europa-list@matronics.com <europa-list@matronics.com>
> Date: 5/11/2005 11:56:32 AM
> Subject: Europa-List: pin holes
>
>
> A plea for help from anyone who has used 'Superfil'. I have small areas
> which are riddled with pin holes and have tried a variety of ploys to
> get rid of them:
>
> 1. Filling them with more superfil - they are still there
>
> 2. Using a brushing pin hole filler (Aerodur) - they are still there
>
> 3. Taking all the affected filler back to the glass and starting again -
> they are still there
>
> What is particularly irritating is that most of the surface is fantastic
> - only small localised areas are affected. Having now spent about 4
> months filling and sanding the tail planes alone, the local asylum is
> looking more inviting than the work shop. Any suggestions?
>
> Regards
>
> Paul
>
> G-GIDY
>
>
|