Troy,
>I would be interested in more info. on this. I am using the MAC grips
with
> the trim switches and don't have a relay deck. From the recent thread
I am
> assuming I need more than just switches on the stick and the servo and
> indicator.
It depends on whether or not you will have a second set of trim
switches on the co-pilots stick. If there is only one set of switches,
then you won't need the relay deck. If you have a second set of
switches, you will need the relay deck. I can scan the instructions
for the MAC trim systems and send them along or post them on the Europa
Owners site if you wish.
Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, 914, Airmaster C/S
http://www.europaowners.org/N914XL
(75%) tail kit done, wings closed, cockpit module installed, pitch
system in, landing gear frame in, rudder system in, outrigger mod in,
Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar
in, flap drive in. Working in - 24 Instrument Panel, 25 Electrical, 27
Setting Wings, 28 Flaps, 29 Main Gear, 30 Fuel System, 32 Tail, 34 Door
Latches & 35 Doors, 37 Finishing.
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
|