>>>My 914 carbs both have what appear to be drip trays beneath them with
drain holes leading to a pipe nipple. I am presuming these should indeed
have piping taking any (?) fuel away from the exhaust below them.
The Rotax installation manual supplied with the engine states that they must be
drained away. I fed lines down the side of the radiator support.
>>> There is a similar fitting on the port underside of the
airbox with a similar lack of instructions.
Ditto.
>>>> Lastly, anyone using the
NPT tapping in the airbox to measure airbox temp?
Yes. I used a spare input into my engine management system.
Tony
|