Craig,
Don't forget that you will also need a return fuel line from the engine back
to the tank. For the 912S, the supply line is 5/16" and the return line is
1/4". If the 914 can also use 1/4" return line, you may not have to remove
what you have already installed. Return flow is greater for the 914 than it
is for the 912S, however, so the return line may also have to be larger.
Dave DeFord
N135TD
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of
> craig ellison
> Sent: Thursday, March 27, 2003 10:15 PM
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Re: Fuel line requiremnets for Rotax
>
>
> --> <craig.ellison2@verizon.net>
>
> Hi Bob,
>
> Thanks for your input. Since I don't have the firewall
> forward kit yet I wasn't sure what the engine needs for fuel
> flow. What I've done will be easy enough to switch over to
> 3/8". BTW is there any word yet on stainless steel fuel
> filler tubes? I still need one when they're available.
>
> Thanks much for your help.
>
> craig
|