Hopefully one of you out there can enlighten me-- In closing out the root
ribs, the manual states that the first two layers of bid should run about 2"
beyond the metal bush. Do they intend that after laying up the rib itself,
you turn the glass away from the rib/spar corner out about 7" along the spar
stub, which would imply that you have to snip holes so that the cloth can
pass around the bush? Or, is it that the glass should run only about 3" from
the rib/spar corner necessitating no bush holes? This is a bit confusing
since the manual has usually mentioned in the past whether or not you have to
cut holes.
Thanks in advance!
Chuck US#36
|