just to clarify my question relates to the interior lay ups. is there a
trick to this?
William Daniell
+1 786 878 0246
On Mon, Oct 3, 2022, 12:52 William Daniell <wdaniell.longport@gmail.com>
wrote:
> I am coming towards the end of my tank build...the left outlet was too
> close to the torque tube and had to be redone. And the spacers which
> stop the tank bulging had to have their top angle removed (didnt fit) and
> nut plates put on. i still have to fit the filler tube . And then sand
> to ensure no flakes could block the outlets. And then put the top on.
> And adjust the hole for the filler tube in yhe rear bulkhead.... No
> matter. I can feel I'm getting close.
>
> The next step is engine testing before final closing.
>
> Wrt closing, to those that have done this before how does one go about the
> inside reinforcements? (outside seems straightfoward) Any wisdom to share
>
> thanks
>
> will
>
>
> William Daniell
> +1 786 878 0246
>
|