Alan - can't help with digital instrument readouts.
But if you pop the top plug out of each pot you will be able to turn the
engine over fast enough on the starter to see the oil pressure rise.
Good luck
Pete
G-RMAC Classic #109
On 20/05/2019 19:03, Alan Twigg wrote:
>
> I have just reached engine start stage but have no indicated oil pressure. I
primed and started with a flashing 145 in the oil pressure window. All other
readings
were as expected. I shutdown before 30 seconds and investigated, everything
secure, re primed the oil, with the same flashing 145.
> Any ideas out there? Scared for my engine (52 years retired engine man).
> Alan Twigg
> Long Wing mono
> Kit 463
>
> Sent from my iPad
>
>
|