europa-list
[Top] [All Lists]

RE: Europa-List: a compass question

Subject: RE: Europa-List: a compass question
From: Bud Yerly <budyerly@msn.com>
Date: Fri, 22 Feb 2019 15:41:19
Mike,
Balancing your prop will get rid of most of that also.  Even at .07 (consid
ered a fine balance) one can feel the shaking at this out of balance condit
ion on a two blade.  Get the prop down to .04 or better on a two blade prop
 helps vibration quite a bit.  Three blade props feel smoother because they
 change the frequency of the pulses but they two should get a very fine bal
ance.

We have all gotten lazy as propeller manufacturers all statically balance t
heir props.  However the spinner and on some gearbox engines, the rotationa
l balance of the engine/prop together still need to be fine tuned.


Best Regards,
Bud Yerly

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Window
s 10

________________________________
From: owner-europa-list-server@matronics.com <owner-europa-list-server@matr
onics.com> on behalf of duanefamly@aol.com <duanefamly@aol.com>
Sent: Tuesday, February 19, 2019 11:24:39 PM
Subject: Re: Europa-List: a compass question

Hey Fred,

While I=92m not using the same Navigator compass as you, my compass is moun
ted centered on top of the instrument panel halfway back from the front edg
e. The problem that arose once I started flying, and it may only be my prob
lem, is that this area is not very rigid and my compass vibrates=85..a lot.
 Enough so that I added some stiffening to the underside of the instrument 
module. While it did help, it did not alleviate it completely. I just wante
d you be aware prior to your decision as this may have some adverse effects
 for your compass.

Mike Duane
N377EA Europa XS Conventional Gear
Las Vegas, NV

Sent from Windows Mail

From: Fred Klein<mailto:freddythek10@gmail.com>
Sent: =FDTuesday=FD, =FDFebruary=FD =FD19=FD, =FD2019 =FD11=FD:=FD52=FD =FD
AM


Along with my Europa kit, I ordered the =93Navigator=94 compass which was o
ffered as an accessory at the time of purchase.

I ask because the mounting procedure offers little slack=85i.e., no second 
chance...and I want to get it right the first time.

And I=92m wondering what that "optimum position=94 might be=85?=85

With only =93hangar flying=94 experience, my sense is that the best positio
n would be to mount the adhesive pad provided as high as possible on the wi
ndscreen, along the aircraft=92s centerline=85

A different approach would be to rotate the bracket with the mounting pad a
nd adhere it to the top of the instrument panel module, again on the aircra
ft centerline=85

Or is there, perhaps, another alternative?

Have Europa pilots with in-flight experience settled this question?=85or ha
s the digital world eliminated the need or desirability for what=92s become
 a little anachronism?

Advice and counsel appreciated,

Fred
A194



<Prev in Thread] Current Thread [Next in Thread>