europa-list
[Top] [All Lists]

Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 All Euro

Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 All Europas
From: Tim Ward <ward.t@xtra.co.nz>
Date: Sun, 7 Jan 2018 07:23:40

Hi Pete,
Sure thing, done.
Tim 

Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand

ward.t@xtra.co.nz

Mob +64 210640221


> On 7/01/2018, at 2:39 AM, Peter Jeffers <pjeffers@talktalk.net> wrote:
> 
> 
> Hi Tim,
> As and when you get a batch of these metal elbows for Europa XS made up, could
you please include one for J Baranski (G-CCJX).  John is a Europa Club member
in the UK, but has not as yet registered for the Matronics Forum so I am sending
this request on his behalf.
> Pete Jeffers   (Europa Club LAA Inspector)
> PS he is currently AOG as he damaged his original whilst trying to inspect it.
> 
> -----Original Message-----
> From: owner-europa-list-server@matronics.com 
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Tim Ward
> Sent: 02 January 2018 20:11
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 All
Europas
> 
> 
> Thanks Brian.
> Most appreciated.
> Tim 
> 
> Tim Ward
> 12 Waiwetu Street,
> Fendalton,
> Christchurch, 8052
> New Zealand
> 
> ward.t@xtra.co.nz
> 
> Mob +64 210640221
> 
> 
>> On 3/01/2018, at 6:46 AM, Brian Davies <brian.davies44@gmail.com> wrote:
>> 
>> --> <brian.davies44@gmail.com>
>> 
>> Update- a formal LAA Mod application for the XS aluminium elbow has now been
submitted and is "in the system".
>> 
>> I will let you know when it has been approved.
>> 
>> Regards
>> 
>> Brian
>> 
>> -----Original Message-----
>> From: owner-europa-list-server@matronics.com 
>> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Brian 
>> Davies
>> Sent: 29 December 2017 17:33
>> To: europa-list@matronics.com
>> Subject: RE: Europa-List: Re: LAA Airworthiness Alert. AIL December 
>> 2017 All Europas
>> 
>> --> <brian.davies@clara.co.uk>
>> 
>> Hi Jon,
>> 
>> The standard lengths are 76mm so I have ordered two .  You need about 30mm 
>> overlap
on to each joint surface and there are effectively 4 joint surfaces.
>> 
>> Regards
>> 
>> Brian
>> 
>> -----Original Message-----
>> From: owner-europa-list-server@matronics.com 
>> [mailto:owner-europa-list-server@matronics.com] On Behalf Of JonSmith
>> Sent: 29 December 2017 11:48
>> To: europa-list@matronics.com
>> Subject: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 
>> All Europas
>> 
>> --> <jonsmitheuropa@tiscali.co.uk>
>> 
>> Hi Brian,  I am going to order the Profuel joint from Merlin as you 
>> described,
in anticipation of the standard mod.   I bought one of Tims aluminium elbows
some years ago but never got around to fitting it and its still in my garage!
 
>> Sorry for a silly question but do you think I need two of them (one for each
end) or will one of them cut into two be sufficient?
>> Cheers!
>> 
>> 
>> brian.davies44@gmail.c wrote:
>>> As I explained in an earlier e-mail, there is no LAA Standard Mod to fit an 
>>> aluminium elbow on an XS Europa. As nobody has applied for a standard Mod I 
>>> have agreed with Andy Draper that I will do so.  It will be based on Tim 
>>> Ward's aluminium elbow and will use Samco Profuel joints.  These can be 
>>> purchased  from  www.merlinmotorsport.co.uk   in a short length of 76mm for 
>>> UK Pounds 11.24 plus VAT and postage.  Currently there is a 39 day lead 
>>> time on this item. Part number PSCH51-BLU
>>> 
>>> I will give you a progress report after Christmas.
>>> 
>>> Regards
>>> 
>>> Brian Davies
>>> 
>>> --
>> 
>> 
>> --------
>> G-TERN
>> Classic Mono
>> 
>> 
>> 
>> 
>> Read this topic online here:
>> 
>> http://forums.matronics.com/viewtopic.php?p=476852#476852
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ---
>> This email has been checked for viruses by AVG.
>> http://www.avg.com
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
> 
> 
> 
> 
> 
> 
> 
> 
> 



<Prev in Thread] Current Thread [Next in Thread>