Tiens voila la KTR2 seconde dition, je me suis tromp les caractres
sont blancs et le fond Noir dans la rubrique Samles de leur site tu as
les prix catalogue.
MA
Le 23/09/2015 12:40, Alain Chabert a crit :
> Hi All,
>
> You can get set for carbs here:
>
> MotoKristen
> 8-10 Rue du Marchal Joffre
> 10200 BAR SUR AUBE
> E-mail :philippe@motokristen.com <mailto:philippe@motokristen.com>
> Tlphone : 03.10.11.00.50
> Web : http://www.pieces-moto-kristen.fr
> <http://www.pieces-moto-kristen.fr/>
>
> *Articles*: Kit de rfection carburateur BING pour BMW partir de 1970
> *Rfrenc*e : MK13952
>
> Regards
>
> *Alain CHABERT*
>
>
> e-mail : _alainchabert@wanadoo.fr_
> Le 19/09/2015 10:59, John Archer a crit :
>>
>> Hi Jon, you can get a gasket set for both carbs for about 40 euros from
>> Avirex
here:
>> http://www.avirex.fr/catalogue,22/produits/kits-pochettes-consommables/pochettes,60/
>> Their prices are competitive, especially if you are paying in gbp. You could
buy individual o rings but you need to know the sizes.
>> Regards John
>>
>>
>>
>>
>>> On 19 sept. 2015, at 09:02, Europa-List Digest
>>> Server<europa-list@matronics.com>
wrote:
>>>
>>> *
>>>
>>> =================================================
>>> Online Versions of Today's List Digest Archive
>>> =================================================
>>>
>>> Today's complete Europa-List Digest can also be found in either of the
>>> two Web Links listed below. The .html file includes the Digest formatted
>>> in HTML for viewing with a web browser and features Hyperlinked Indexes
>>> and Message Navigation. The .txt file includes the plain ASCII version
>>> of the Europa-List Digest and can be viewed with a generic text editor
>>> such as Notepad or with a web browser.
>>>
>>> HTML Version:
>>>
>>>
>>> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter
>>> 15-09-18&Archive=Europa
>>>
>>> Text Version:
>>>
>>>
>>> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter
>>> 15-09-18&Archive=Europa
>>>
>>>
>>> ===============================================
>>> EMail Version of Today's List Digest Archive
>>> ===============================================
>>>
>>>
>>> ----------------------------------------------------------
>>> Europa-List Digest Archive
>>> ---
>>> Total Messages Posted Fri 09/18/15: 7
>>> ----------------------------------------------------------
>>>
>>>
>>> Today's Message Index:
>>> ----------------------
>>>
>>> 1. 02:32 AM - Long shot - mono conversion parts (graeme bird)
>>> 2. 06:29 AM - Re: Long shot - mono conversion parts (Steven Pitt)
>>> 3. 06:31 AM - Re: Wrapping composite aircraft (Steven Pitt)
>>> 4. 07:36 AM - Re: Long shot - mono conversion parts (spcialeffects)
>>> 5. 02:18 PM - Re: Wrapping composite aircraft (pestar)
>>> 6. 04:09 PM - Re: Re: Wrapping composite aircraft (Alex Kaarsberg)
>>> 7. 10:22 PM - Rotax 912 Carburetor - Possible to purchase a few
>>> O-Rings?
(italianjon)
>>>
>>>
>>>
>>> ________________________________ Message 1
>>> _____________________________________
>>>
>>>
>>> Subject: Europa-List: Long shot - mono conversion parts
>>> From: "graeme bird"<graeme@gdbmk.co.uk>
>>>
>>>
>>> A long shot I know, but wondered if anyone has any mono to tri gear or
>>> conventional
>>> tail dragger conversion parts they would consider cashing in/selling to me?
>>>
>>> Bucks UK.
>>>
>>> --------
>>> Graeme Bird
>>> G-UMPY
>>> Mono Classic/XS FFW 912S/Woodcomp 3000/3W
>>> Newby: 180 hours 4 years on the Mono
>>> g@gdbmk.co.uk
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=447181#447181
>>>
>>>
>>> ________________________________ Message 2
>>> _____________________________________
>>>
>>>
>>> From: "Steven Pitt"<steven.pitt2@ntlworld.com>
>>> Subject: Re: Europa-List: Long shot - mono conversion parts
>>>
>>>
>>> Speak to Nigel Graham (or the factory).
>>> Steve Pitt
>>> ----- Original Message -----
>>> From: "graeme bird"<graeme@gdbmk.co.uk>
>>> Sent: Friday, September 18, 2015 10:24 AM
>>> Subject: Europa-List: Long shot - mono conversion parts
>>>
>>>
>>>> A long shot I know, but wondered if anyone has any mono to tri gear or
>>>> conventional tail dragger conversion parts they would consider cashing
>>>> in/selling to me?
>>>>
>>>> Bucks UK.
>>>>
>>>> --------
>>>> Graeme Bird
>>>> G-UMPY
>>>> Mono Classic/XS FFW 912S/Woodcomp 3000/3W
>>>> Newby: 180 hours 4 years on the Mono
>>>> g@gdbmk.co.uk
>>>>
>>>>
>>>> Read this topic online here:
>>>>
>>>> http://forums.matronics.com/viewtopic.php?p=447181#447181
>>> ________________________________ Message 3
>>> _____________________________________
>>>
>>>
>>> From: "Steven Pitt"<steven.pitt2@ntlworld.com>
>>> Subject: Re: Europa-List: Wrapping composite aircraft
>>>
>>> William,
>>> Jeff Behrnes (Baby Blue) in Baton Rouge has been involved in aircraft
>>> graphics and wrapping for some years. If you can get hold of him he may
>>> be able to help.
>>> Regards
>>> Steve Pitt
>>> ----- Original Message -----
>>> From: William Daniell
>>> To:europa-list@matronics.com
>>> Sent: Thursday, September 17, 2015 6:56 PM
>>> Subject: Europa-List: Wrapping composite aircraft
>>>
>>>
>>> Has anyone wrapped a Europa?
>>>
>>>
>>> I have not yet been able to find anyone with experience of finishing a
>>> composite aircraft in Bogota so I was thinking that this might be an
>>> interesting alternative.
>>>
>>>
>>> Thanks
>>>
>>>
>>> Will
>>>
>>>
>>> William Daniell
>>>
>>> LONGPORT
>>>
>>> +57 310 295 0744
>>>
>>>
>>> ________________________________ Message 4
>>> _____________________________________
>>>
>>>
>>> Subject: Europa-List: Re: Long shot - mono conversion parts
>>> From: "spcialeffects"<spcialeffects@aol.com>
>>>
>>>
>>> Graeme, why the conversion?
>>>
>>> Frank Xuereb kit#165
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=447193#447193
>>>
>>>
>>> ________________________________ Message 5
>>> _____________________________________
>>>
>>>
>>> Subject: Europa-List: Re: Wrapping composite aircraft
>>> From: "pestar"<peter@reivernet.com>
>>>
>>>
>>> On my DynAero MCR-4S, all the graphics are vinyl not painted. Where the
>>> there
>>> was a major colour ie white, light blue (underneath wings) - this was
>>> painted.
>>>
>>> While computer cut graphics give great flexibility in your design I caution
you,
>>> it is not how it looks after completion but how it looks in 4 years time.
Looking
>>> after vinyl graphics on a plane is a lot more difficult than looking after
>>> paint, vinyl can get tatty, do not like being exposed to 120 knot winds and
>>> do not have the same lustre finish as paint.
>>>
>>> Knowing what I know now I would probably have done my design in paint rather
than
>>> vinyl.
>>>
>>> Trust this helps
>>>
>>> Cheers Peter
>>>
>>> --------
>>> Peter Armstrong
>>> Auckland, New Zealand
>>> DynAero MCR-4S (Do not shoot me :) ).
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=447201#447201
>>>
>>>
>>> Attachments:
>>>
>>> http://forums.matronics.com//files/zk_psa_150.jpg
>>>
>>>
>>> ________________________________ Message 6
>>> _____________________________________
>>>
>>>
>>> From: Alex Kaarsberg<kaarsberg@terra.com.br>
>>> Subject: Re: Europa-List: Re: Wrapping composite aircraft
>>>
>>>
>>> A tip I learnt on mach .8 planes, stickers well placed and free from
>>> blisters,
>>> edge seal with superglue- simply apply a thin bead along the edge of the
>>> adhesive
>>> and let it harden, or use an accelerator spray.
>>>
>>> Alex Kaarsberg
>>>
>>>
>>>> On 18/09/2015, at 18:16, pestar<peter@reivernet.com> wrote:
>>>>
>>>>
>>>> On my DynAero MCR-4S, all the graphics are vinyl not painted. Where the
>>>> there
>>> was a major colour ie white, light blue (underneath wings) - this was
>>> painted.
>>>> While computer cut graphics give great flexibility in your design I caution
you,
>>> it is not how it looks after completion but how it looks in 4 years time.
>>> Looking after vinyl graphics on a plane is a lot more difficult than looking
>>> after paint, vinyl can get tatty, do not like being exposed to 120 knot
>>> winds
>>> and do not have the same lustre finish as paint.
>>>> Knowing what I know now I would probably have done my design in paint
>>>> rather
>>> than vinyl.
>>>> Trust this helps
>>>>
>>>> Cheers Peter
>>>>
>>>> --------
>>>> Peter Armstrong
>>>> Auckland, New Zealand
>>>> DynAero MCR-4S (Do not shoot me :) ).
>>>>
>>>>
>>>>
>>>>
>>>> Read this topic online here:
>>>>
>>>> http://forums.matronics.com/viewtopic.php?p=447201#447201
>>>>
>>>>
>>>>
>>>>
>>>> Attachments:
>>>>
>>>> http://forums.matronics.com//files/zk_psa_150.jpg
>>> ________________________________ Message 7
>>> _____________________________________
>>>
>>>
>>> Subject: Europa-List: Rotax 912 Carburetor - Possible to purchase a few
>>> O-Rings?
>>> From: "italianjon"<jon.catilli@gmail.com>
>>>
>>>
>>> Hi All,
>>>
>>> I am wondering if it is possible to purchase a few O-Rings for a Rotax Carb,
without
>>> buying the complete and expensive overhaul kit.
>>>
>>> I have a couple that are missing and/or cracked.
>>>
>>> Using Fig 73-14 of the latest issue Heavy Maintenance Manual as a guide, I
am looking
>>> for 2 x O-Rings that dampen the needle (38) and 1 x O-Ring for the Idle
>>> Mixture Screw (37).
>>>
>>> Thanks
>>>
>>> Jon
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=447221#447221
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
> http://www.matronics.com/contribution
This email has been protected by YAC (Yet Another Cleaner) http://www.yac.mx
|
