Brian, yes. The only slight downside (apart from the price) is the
acceptable but not great kink resistance for the larger diameters.
Regards,
Jan
On 7/28/2015 11:06 AM, Brian Davies wrote:
>
> Jan,
>
> That is Gates 27304 Barricade hose that meets just about every requirement
> you could think of. Manufactured to meet the California emission
> regulations for low permeability hose. It is very hard to get in the UK and
> is expensive. Amazon UK are selling a 24 inch length of 5/16 inch ( 8mm)
> for UK 6.28 plus postage. The supplier is Hires Auto Parts International
> who will sell a 25 feet roll. Probably the best you can get.
>
> Regards
>
> Brian
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Jan de Jong
> Sent: 27 July 2015 17:14
> To: europa-list@matronics.com
> Subject: Re: Europa-List: NBR ruber fuel line question
>
>
> I bought this stuff:
> http://www.nickstruckparts.com/fuelhose.html
> Don't know where to get it in Europe..
> Jan de Jong
>
> On 7/27/2015 5:00 PM, Nigel Graham wrote:
>> I'm not sure when DIN 73379 was introduced, but it may have been
>> before ethanol was incorporated into fuel (and might not therefore
>> guarantee compatibility), certainly ethanol does react with some
>> synthetic rubbers.
>> As a subject that is close to my heart, I have collected some
>> informative documents (credits in documents), two of which I attach FYI.
>>
>> Nigel
>>
>>
>> On 27/07/2015 13:18, JohnFrance wrote:
>>> --> <77alembert@gmail.com>
>>>
>>> To the experts out there who have knowledge of fuel lines and
>>> material quality, I would like your opinion on the following tubing.
>>> It is rated at 10 bar, has no internal reinforcing but has a cotton
>>> over-braiding. In theory it is more than adequate for the job as I
>>> have a pressure regulator limiting to 2.3 psi but I would like to
>>> have your ideas on this product please?
>>>
>>> http://www.advancedfluidsolutions.co.uk/6mm-id-14-cotton-over-braided
>>> -nitrile-fuel-hose-pipe-tubing-279-p.asp
>>>
>>>
>>> regards
>>> John
>>>
>>> --------
>>> Europa mono Nr 192
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=445224#445224
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
>
>
|