One very good solution for the oil hose is "Parker Push-lok 836" 1/2 "
colour blue 150C max
Michel AUVRAY
Le 03/03/2015 05:59, Martin Tuck a crit :
>
> Hi All,
>
> I'm looking to replace my oil hoses. The one from the pump to the
> radiator has a 90 deg bend in it. I had noted that it was suggested I
> contact Lockwood as they have a metal 90 deg adapter to which regular
> hose could be fitted. I contacted them and they said just to use 'an
> AN fitting size -8'. Looking at the manual though the thread seems to
> be 14.4mm so I'm not sure what they meant now. I wonder if they meant
> to make a 90 deg elbow using AN fittings. I couldn't figure the parts
> I would need though.
>
> Any help as to what others have done would be appreciated.
>
> Also, are there any US sources for the rubber engine mounts or are
> they uniquely Europa, in which case I would contact the factory in the
> UK.
>
> Regards,
> Martin Tuck
> N152MT
> Wichita, KS
>
>
|