Hi! All ,
On subject of the lift pins and mods. I would like to offer another fact
that the front lift pins were also changed to upgrade the material they were
made from.
Regards
Bob Harrison G-PTAG Kit 337 Classic /XS hybrid now with over 1000 hours on
the airframe.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
nigel_graham@m-tecque.co.uk
Sent: 18 August 2013 09:03
Subject: Re: Europa-List: Re: Wing lift and drag pins
--> <nigel_graham@m-tecque.co.uk>
Actually earlier than than Pete, The long pin mod date was 14th Sept '95 and
can be found as part of the Issue 10 Fuselage manual.
Nigel
On 18/08/2013 08:20, Pete Lawless wrote:
>
> Just another memory from the very distant past - we also had to change
> the front pin for a longer one. Be worth checking that the front pin
> you have is the correct size. Can't find it in the mod list on the
> Europa site but I think it was introduced 2000 ish.
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of
> spcialeffects
> Sent: 18 August 2013 05:15
> To: europa-list@matronics.com
> Subject: Europa-List: Re: Wing lift and drag pins
>
> --> <spcialeffects@aol.com>
>
> Thanks Nigel its that first page that I'm after. I couldn't remember
> who sent me the wing layup papers (using the uni cloth) before (thanks
> again). I am doing mod 74 but there is no way of incorporating this
> before having skinned the foam so I have to cut a hole in the skin to fit
the mod.
> Fortunately it hasn't got any filler on it so this makes it a little
easier.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=406943#406943
>
>
|