Morning Tony
Why not use some proper jointing compound between the parts. It will also
prevent corrosion. I was given a tin of a yellow paste by my original
inspector. I have just had a look in the garage to see if I could find the
name but I think the tin has been passed on to another builder.
Regards
Pete
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Tony Renshaw
Sent: 11 July 2013 08:59
Subject: Europa-List: Rogue Hole in FL16
The hole n the square end are supposed to be to suit the brackets from the
cross tube. So, it's a rogue hole, and if it came from Europa, as I imagine
it must of as a fast build kit, with the bearing possibly pre installed as
well, get a new one. I don't think you can use it due to the proximity of
the wrong hole, compromising the bracket.
I undid my temporary setup and now will use some sort of nylon to avoid the
friction scored marks in my setup.
Hope this he's.
Regards
Tony Renshaw
--
This message has been scanned for viruses and
dangerous content by Houxou, and is
believed to be clean.
|