Thank you very much Remi. Good info.
But adding 7,5 and 3,74 makes 11,24 for an original Europa wheel with
Carlisle tyre. Mine, with Titan tyre, weighs most definitely less than
11 kg. Curious.
Jan de Jong
On 10/8/2012 5:11 PM, Remi Guerner wrote:
>
> To those Monowheel drivers who are interested in the Beringer wheel and brake
kit, I visited their factory today to sort out the weight saving issue. I met
the boss Gilbert Beringer and his son Remi who designed the proposed system for
the Europa. I was coming with the idea that the disagreement on the original
Europa wheel and brake weight was due to the tyre and I was right. We weighted
different tyres and found that the used 7.00-6 Condor tyre weighted 5 kg, a
new 7.00-6 AirTrac 4,16 kg and a new 8.00-6 Carlisle (which is very similar to
the Titan turf glide) was coming at 3,74 kg.
> We finally weighted the Europa wheel+brake+axle+spacers+tube+bolts and nuts
> and
found 7,5 kg.
> This is to be compared to 4,54 kg for the replacement parts from Beringer.
> Therefore, the weight saving is around 3 kg, provided you are using the same
tyre as before.
> The Beringer kit comes with a 7.00-6 AirTrac 6 ply, so if you are already
> using
this type of tyre you will save those 3 kg. But if you are presently using
the original Europa tyre (Carlisle or Titan) you will save 2,5 kg only. If you
are using a heavier tyre such as the Condor you will be close to the 4 kg saving
as claimed by Beringer.
> Those figures do not include the master cylinder and brake handle. Those parts
are made of light alloy by Beringer compared to steel for the original go kart
master cylinder, so I am prety sure there is some more weight saving there.
>
> Remi Guerner
> F-PGKL
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=384931#384931
>
>
|