On 04/01/2012 21:06, Nigel Graham wrote:
> Graeme,
>
> See the attached photo for a good way to safety wire the
> exhaust springs. This is how the CSA Sport Cruiser boys do it.
>
> Nigel
One of the reasons this spring as shown needs a safety
wire is that the spring is on the wrong way round. The
openings face the lugs. So that it is easier to get the
spring on, and easier for it to jump off.
All my springs are put on the harder way with the spring
end openings away from the lug.
my 2 penny worth
Richard Holder
|