There is tony, I'll email you later with how I did it, got to run to work
now
Craig
goldcoast
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Tony Renshaw
Sent: Wednesday, November 30, 2011 8:35 PM
Subject: Europa-List: Moulding material
Gidday,
I am attempting to remould my door tang fuselage recesses, with the doors
open and the top off the fuselage, doors on. I have only opened up the
original recesses on their inboard ends, leaving the hing attachment areas
as original. The door tangs protrude up into the space and I could always
spend hours gluing pieces of foam onto the tangs when taped, and then try
and tidy up their shapes, then glass over the top of that and in time
dissolve the foam. I am wondering if there is another way, maybe using glad
wrap, thin plastic sandwich wrap, and modelling clay. I am wondering if
anyone has a moulding material that is easy to shape, and easy to dissolve
away leaving a nice surface afterwards. If not, well I'll just struggle on
but there must be an easier way that currently escapes me.
Reg
Tony Renshaw
Sydney Aussie.
-----
No virus found in this message.
Checked by AVG - www.avg.com
|