Hi Jon
I have run mine through a CPC bulkhead connector using gold plated machine
pins
and too date i have had no problems with interference,
regards
Ivor
On 27 January 2011 15:20, JonSmith <jonsmitheuropa@tiscali.co.uk> wrote:
> jonsmitheuropa@tiscali.co.uk>
>
> Just a quick question - is it considered acceptable for the electric tacho
> wires to pass through the firewall via the multipin plug/ socket connector
> that I have all the other low current things going through (oil press/ temp,
> starter solenoid control wire etc etc) or are the tacho wires subject to
> interference and should thus be routed separately? Also is it advisable for
> these wires to be shielded or just plain? I'm not talking about the
> ignition (P) leads, I have those shielded and separate, just the tacho.
> Many Thanks, Jon
>
> --------
> G-TERN
> Classic Mono
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=328681#328681
>
>
|