Hi Graham!
This hose does not have solid inner liner of ptfe. It is therefore
Compatible with the push on connector we are faced with on the older
engines. The Aeroquip 666 which is the ultimate fuel hose on many
specs is in two grades, one with, one without the carbon stripe for
prevent triboelectric phenomena. With that hose you need to be
careful about making sure you have the carbon and that you have
The necessary AN hose fittings because you can not push the Teflon onto
barb connectors
Cheers,
Ira
--------
Ira N224XS
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=325664#325664
|