I have decided to unsubscribe to the Matronics lists, there is nearly no
traffic and no content to red.
Chris Norman, CEO
www.digitalrealitycorp.com
owner www.goflying.co
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Europa-List
Digest Server
Sent: Sunday, September 19, 2010 1:58 AM
Subject: Europa-List Digest: 4 Msgs - 09/18/10
*
=================================================
Online Versions of Today's List Digest Archive
=================================================
Today's complete Europa-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Europa-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter
10-09-18&Archive=Europa
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter
2010-09-18&Archive=Europa
===============================================
EMail Version of Today's List Digest Archive
===============================================
----------------------------------------------------------
Europa-List Digest Archive
---
Total Messages Posted Sat 09/18/10: 4
----------------------------------------------------------
Today's Message Index:
----------------------
1. 02:52 AM - Re: Carb drip trays? (JonSmith)
2. 02:53 AM - Re: Throttle cables (JonSmith)
3. 07:04 AM - Carb drip trays? (Guerner Remi)
4. 11:01 AM - Messages from ~GS (Frank Mycroft)
________________________________ Message 1
_____________________________________
Subject: Europa-List: Re: Carb drip trays?
From: "JonSmith" <jonsmitheuropa@tiscali.co.uk>
Many thanks for the advice, much appreciated - especially those who have
told me
the Rotax drip trays don't fit with the carb heaters fitted - you've saved
me
quite a few quid!!
Jon
--------
G-TERN
Classic Mono
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=312822#312822
________________________________ Message 2
_____________________________________
Subject: Europa-List: Re: Throttle cables
From: "JonSmith" <jonsmitheuropa@tiscali.co.uk>
Thanks for the advice, much appreciated. Jon
--------
G-TERN
Classic Mono
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=312823#312823
________________________________ Message 3
_____________________________________
From: Guerner Remi <air.guerner@orange.fr>
Subject: Europa-List: Carb drip trays?
John,
There are two reasons for drip trays:
1. shielding the heat radiated by the exhaust pipes which may cause
the fuel to boil in the carb bowls.
2. allowing fuel possibly leaking form the carbs to be drained below
the engine, instead of being ignited by the red hot exhaust.
Although the normally aspirated 912 and 912S carbs usually do not leak
(unlike the 914's which are leaking almost all the time due to the
boost pressure) I think it is good practice to have drip trays
installed that insure these two functions.
However I do not recommand to install the Rotax drip trays which bolt
to the carb rubber flange as:
1. They de not fit with the hot coolant carb heat system
2. They do not allow to remove the carb bowl for inspection unless you
remove the carbs, making servicing more time consuming.
One solution is to make your own aluminum drip trays and have them
bolted to the airbox using anchor nuts for easy removal.
Hope that helps.
Remi
> Is it considered to be either a/ mandatory, b/ highly recommended,
> c/ quite nice
> to do, or d/ totally unnecessary, to fit drip trays/ heat shields to
> the Rotax
> carbs?
________________________________ Message 4
_____________________________________
From: "Frank Mycroft" <frankm@clara.net>
Subject: Europa-List: Messages from ~GS
I have exactly the same problems with GS messages.
Frank
|