craig bastin wrote:
> If you are totally commited to getting the extra head room with the
> bubble door "glass"
> you might try taking the doors off and gradually and carefully heating
> the offending area with the door upside
> down and allow it to sag under its own weight. then let it cool and
> replace the doors
> Of course this approach would only give you an extra 20 to 30mm. This
> way if you are happy with the
> result it has cost you very little, and if you wreck the "glass" then
> you can still go ahead and replace it
> as you first intended.
>
> craig
You will wreck the Plexi if you do that. It reverts to it's "memory
state" when heated above 130C, ie flat but bent. It will shrink
Graham
|