My W34 reads as 53.85mm from the end of the tube to inside of flange (the
outside being the face that goes
against the side of the fuse)
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Carl
Pattinson
Sent: Sunday, 25 May 2008 4:26 AM
Subject: Europa-List: Help! Mod 52 or 74
<carl@flyers.freeserve.co.uk>
Does anybody have a kit for either Mod 52 or Mod 74 (with the tie bar
assembly) that hasnt been fitted yet
I need the dimension of the W34 mushroom end which fits inside the steel
tube tie bar. To be precise I need to know exactly how long the shaft is
that protrudes from the rear of the mushroom flange - preferably in mm but
inches would be OK.
The reason is that I may have drilled the inboard holes through the tie bar
in the wrong place - dont ask how this came about , its a long story. I
believe the dimension should be 2" or 51mm but im hoping it is nearer 55mm.
As mine is now glued in place I cant check my own dimensions without ripping
everything apart (which I may have to do anyway if it is seriously out).
Carl Pattinson
G-LABS
Checked by AVG.
3:36 PM
Checked by AVG.
3:36 PM
|