Jeff,
They are pricey, but I use part number A-700 Button Lodck Dash Control.
Red for heat and Black for cool if you have both. Usually the 6 foot is
OK.
I secure the .062 wire end with a Z bend and the spiral sleeve wrap with
a "cable safe" PN 05-16250 both available through Aircraft Spruce.
Bud Yerly
Custom Flight Creations
----- Original Message -----
From: Jeff B<mailto:topglock@cox.net>
To: europa-list@matronics.com<mailto:europa-list@matronics.com>
Sent: Wednesday, January 30, 2008 10:02 AM
Subject: Re: Europa-List: bowden cables, sliders
<topglock@cox.net<mailto:topglock@cox.net>>
Jos,
When I added the heater door to Baby blue, I used a universal
push/pull
(choke)cable assembly from Auto Zone. Works just fine...
Jeff - Baby Blue
363 hrs
josok wrote:
<josok-e@ukolo.fi<mailto:josok-e@ukolo.fi>>
>
> Hi All,
> The ventilation-heating system has been installed. It should work,
as far as i can imagine. The difficult part for me is how to operate the
selector valves. I ordered some cables from ACS, but these are way to
stiff to flex nicely into the narrow spaces available. Bowden cables
like in use on bicycles probably should do the trick, but then i need
some buttons or sliders on the other side. I have no idea on what's
available and from where. Anybody with some idea before i start
machining something from scratch?
>
> Regards,
>
> Jos Okhuijsen
>
>
>
>
>
>
> Visit - www.EuropaOwners.org<http://www.europaowners.org/>
>
>
>
>
>
>
>
>
>
>
http://www.matronics.com/Navigator?Europa-List<http://www.matronics.com/N
avigator?Europa-List>
http://www.matronics.com/contribution<http://www.matronics.com/contributi
on>
|